EN ▾
Get API key

uncensoredqwen.comGuide

Qwen API Pricing vs DeepSeek: How to Compare

Qwen and DeepSeek both publish per-token prices, and both change them. Instead of quoting numbers that will be stale next month, this guide gives you a method to compare qwen api pricing vs deepseek on your own workload.

Updated

Balance scales weighing token stacks against a server rack, illustrating an API pricing comparison.

Short answer: price both on your own tokens

There is no single winner in qwen api pricing vs deepseek, because the answer depends on which model tier you call, how long your prompts are, how much you ask it to write back, and whether the provider discounts repeated prompt prefixes. Both vendors list their prices on their own pages, and those pages change. Check their current pricing before you decide, and do the arithmetic below with the numbers you see that day.

What does not change is the method. Count your tokens, split them into input and output, multiply by each provider's per-million rate, and add a margin for retries. That gives you a monthly figure you can compare across any number of providers, including the one on this site.

Qwen and DeepSeek are also model families, not single products. Each has several models, from small and cheap to large and costly, and several companies host them. "Qwen API" can mean the maker's own cloud service or a third party hosting the same open weights. Always note exactly which model ID and which host you are pricing.

The formula

For one month, the cost of a workload is:

cost = (input_tokens / 1,000,000) * input_price
     + (output_tokens / 1,000,000) * output_price

Here is a worked example using this site's rates, $0.15 per 1M input tokens and $0.50 per 1M output tokens. Say your product handles 10M input tokens and 2M output tokens in a month.

  • Input: 10 x $0.15 = $1.50
  • Output: 2 x $0.50 = $1.00
  • Total: $2.50

Scale the same workload up tenfold, to 100M input and 20M output, and the total is $15 plus $10, which is $25. Put the other provider's input and output prices into the same two lines and you have a fair comparison. Do it twice for each provider: once for the model you would use in production and once for a cheaper tier you might route easy traffic to.

What moves the real bill

Headline per-token rates tell only part of the story. These five factors usually change the total by more than a small price gap does.

Input to output ratio

Output tokens are often priced higher than input tokens, so check each provider. A summarizer reads a lot and writes a little, so input price dominates. A story generator or code writer does the opposite. Measure your own ratio from a day of logs before comparing.

Caching and discounts

Some providers give a lower rate on repeated prompt prefixes, and some run cheaper off-peak or batch modes. If your app resends a long system prompt on every request, a cache discount can matter more than the base rate. Read each provider's current terms for what applies and when.

Context length

Chat apps resend history on every turn, so the input side grows with conversation length. A 30,000-token history on every turn costs ten times what a 3,000-token history does. Trimming or summarizing history is often the cheapest optimization you can make, whichever provider you use.

Model tier

Each family has small, medium and large models, and sometimes separate reasoning variants that produce long hidden chains of thought. Reasoning output is billed as output. A cheap per-token rate on a model that writes four times as many tokens is not cheap.

Failures and retries

Ask whether a failed or refused request is billed. On this site, failed or refused requests are not charged. Check how others handle it, since a refusal that costs money is a hidden tax on sensitive workloads.

Beyond price: censorship, limits and fit

A low rate is worth little if the model refuses your prompts or throttles you. Both Qwen and DeepSeek models are offered through their makers' hosted services under those providers' terms and content policies, and both can be self-hosted from open weights. If your use case includes mature fiction, frank discussion of sensitive topics or security testing, read the provider's usage policy first, and test a set of your own prompts before you commit.

Rate limits matter just as much. Look up the requests per minute and concurrent request limits for the exact tier you plan to use, and check what happens at the limit. For a streaming product, concurrency tends to be the tight one.

Data handling is the third check. Read what each provider says about retaining prompts and using them for training. On this site, prompts are not used for training.

Where this API fits

This site hosts a different kind of option. It is one open-weight model, run by an independent provider and tuned to answer without content refusals for lawful adult use. It is not the official API of Qwen, DeepSeek or any other vendor, and it is not a router across vendors.

ItemThis API
Input price$0.15 per 1M tokens
Output price$0.50 per 1M tokens
Context window100,000 tokens
Full key limits8 concurrent, 300 requests per minute
BillingPrepaid credit, no subscription, never expires
Refused or failed requestsNot charged

It is text only, with no images, audio, video, embeddings or fine-tuning. If you need the larger or specialised models that a vendor's own platform offers, that platform is the better fit. If your priority is a flat, predictable price and no refusals on lawful adult content, this one is worth a trial.

Switching costs are low

Because the API follows the OpenAI format, trying it means changing a base URL, a key and a model ID. If your code already talks to Qwen or DeepSeek through an OpenAI-style client, a side-by-side test is a few lines.

from openai import OpenAI

client = OpenAI(
    base_url="https://api.uncensoredqwen.com/v1",
    api_key="YOUR_KEY",
)

resp = client.chat.completions.create(
    model="uncensored",
    messages=[{"role": "user", "content": "Summarize this contract clause in plain English."}],
    temperature=0.3,
)
print(resp.choices[0].message.content)
print(resp.usage)

Run the same 50 prompts through each candidate, save the outputs, and read them. Record tokens used per request from the usage field, then plug the averages into the formula above. For migration steps, see the quickstart for moving to this API, and for pitfalls to avoid in any Qwen integration, the common Qwen API mistakes page covers the usual ones.

Latency and reliability are part of the price

Speed and uptime do not appear on a price list, yet they change what a workload costs you. A slow model holds your worker, your socket or your user's patience for longer. A flaky one adds retries, and retries add tokens and engineering time. I have no benchmark numbers for any provider to share here, and you should be wary of anyone who quotes them without showing how they measured.

Measure it yourself. Send the same 50 prompts to each candidate at the hours your users are active, record the time to first token and the total time, and count the failures. A day of that data tells you more than a page of marketing. If your product streams to users, time to first token is the number they feel, so track it separately from total time.

A decision checklist

  1. Write down your monthly input and output tokens from real logs.
  2. Pick the exact model tier at each provider and copy today's per-million prices.
  3. Compute the monthly total with the formula, then add 10% for retries.
  4. Check content policy, rate limits and data handling for your use case.
  5. Test 50 real prompts on each and compare quality by reading the output.
  6. Choose on total cost per usable answer, not on the headline rate.

If you add this API to the test, the pricing page has top-up amounts and bonuses (+5% from $50, +10% from $100, +15% from $200), and the API key page is where you claim the $0.50 trial. Crypto (USDT on TRC20, USDC on Base) is accepted for top-ups of $20 to $500.

Questions and answers

Is Qwen or DeepSeek cheaper per token?

It depends on the model tier and changes over time, so check each provider's current pricing and run the formula on your own input and output volumes.

Is this site the official Qwen or DeepSeek API?

No. It is an independent provider running one open-weight model, priced at $0.15 per 1M input tokens and $0.50 per 1M output tokens.

Why do output tokens matter more than input?

Output is usually priced higher per token than input, and long generations or reasoning chains can multiply the count. Measure your own ratio from logs.

Can I test this API against my current provider?

Yes. It is OpenAI-compatible, so change the base URL, key and model ID to uncensored, and run the same prompts on both.

Your key is one form away

Create an account, copy the key, change the base URL. That is the whole setup.

Get API key